AMIGA 3000
Motorola 68030 at 25 MHz
FPU 68882 (25 MHz)
RAM: 2 MB 32-bit chip RAM and 8 (max 16) MB fast RAM on-board
Enhanced Chip Set (ECS)
Video 12-bit color palette (4096 colors)
Graphic modes from:
320×200 to 320×512 with 32, 64 (EHB mode) or 4096 (HAM mode) on-screen colors
640×200 to 640×512 with 16 on-screen colors
1280×200 to 1280×512 with 4 on-screen colors
Horizontal scan rates of 15.60-31.44 kHz
Vertical scan rates of 50–72 Hz
Built-in scan-doubler & de-interlacer, for use with VGA monitor
4 × 8-bit PCM channels (2 stereo channels)
28–56 kHz maximum DMA sampling rate (dependent on video mode in use)
3.5-inch SCSI Quantum hard disk drive 54MB (removed)
replaced with
BlueSCSI & SD-Card3.5-inch floppy disk drive, double density (880 kB capacity) or high density (1760 kB capacity)
Analog RGB video out (DB-23M)
Analog VGA out (DB-15F)
Audio out (2 × RCA)
Keyboard (5-pin DIN)
2 × Mouse/Gamepad ports (DE9)
RS-232 serial port (DB-25M)
Centronics style parallel port (DB-25F)
Floppy disk drive port (DB-23F)
50-pin internal SCSI connector
External SCSI connector (DB-25F)
4 × 100pin 32-bit Zorro III slots
1 × video slot (inline with Zorro slot)
2 × passive 16-bit ISA slots (requires bridgeboard to activate)
1 × 200-pin CPU expansion slot
8 × 30-pin DIP slots
32 × ZIP slots
2 × front-accessible 3.5-inch drive bays
1 × internal 3.5-inch drive mounting
AmigaOS :
Original 2.0 (Kickstart 2.04/Workbench 2.04)
Upgraded to KS 3.1 / WB 3.1 (Original Cloanto)